Where to find default router ps3

Write down these numbers and then navigate to the login page. Once you have done the login process, note the DHCP range as well. After that, write down a number between 2 and Next, tap on the Windows Start button and click on the search box.

Type cmd in it and press down the Enter button. Then, look for the cmd. Now, write down the IP address you desire to verify. Once again click on Enter. After that, select Internet Connection Settings and confirm the page by clicking on Yes. Tap on OK to proceed with the next step. Now, click on Custom and choose the Wireless option. Then, choose the operation mode and tap on the Manual Settings tab. It also comes in a battery powered version if you want to ditch the cord.

You can run an Ethernet cable from the Ethernet port on the PS3 to your router. The system includes a Wi-Fi adapter, so if you have a Wi-Fi router, you can skip this step unless you prefer the guaranteed stability of a wired connection. Enter its Security Setting and Network Key password. LAN local area network ports are used to connect a computer to the router using an Ethernet cable.

Users questions. Using some encryption is always better than using none, but WEP is the least secure of these standards, and you should not use it if you can avoid it. Skip to content Popular. April 26, Joe Ford. Table of Contents. Step 5: After you have selected Network Setting, move to the right and select Internet Connection Settings in the list that comes up.

Step 8: On the next page select Wired or Wireless connection depending upon how your PS3 is connected to your network. Step 9: We are going to setup this connection manually so we can forward ports to your PS3.

So select Manual Settings. Step Enter the the ip address you want to use for your PS3 into this page. It's important to choose an ip address that not in your router's dhcp range. You can check this by login in to your router and looking at it's dhcp or LAN page. Alternatively you can just pick an ip address that is not close to the ip address we found earlier. For instance if your PS3 was using something like If your PS3 was using something like Only the last group of numbers on the ip address should change, and that group of numbers would range from 2 to Please, don't over think this just pick a number and go with it.

I have just tried to provide some guidelines here so you can pick a better number. This is usually required when your network's router is not passing the dns server information to the computers that have static ip address properly.

The easiest way to do this is to give your ISP a call. They will probably ask you why you need them. Tell them the truth, your PS3 is requesting them. They should give you two ip addresses, one for the primary dns server and one for the secondary dns server.